|
|
Post by mrphoenix1975 on Jan 13, 2019 19:34:30 GMT 2
Do you happen to have similar ebay links for the components? Since coming across your site I have been so excited to embark on this little project. I have received some of the parts and have begun soldering. But, I now realize I have the wrong resistors and want to assure I purchase the correct ones. I am not an electrical engineer, but soldering has been something I have tinkered in since being a child. here it is: link at the bottom. list made by alb eagle. the resistors capacitors arnt listed on the board alb eagle said he will soon make a key for the resistor placement. Have fun! 18 x Rotary encoders 3 x encoders with on/off switch 35 x Tactile Push Buttons 3 x 3 digit 7 segment display 0.36inch CC RED 6 x 4 digit 7 segment display 0.36inch CC RED 1 x 6 digit 7 segment display 0.36inch CC RED 9 x 5 digit 7 segment display 0.36inch CC RED 2 x 2 digit 14 segment display CC RED 18 x Max7219 Chips 18 x Max7219 Sockets 18 x 50V 0.1uF Capacitors 18 x 25V 10uF Capacitors 18 x 220 Ohm Resistors 18 x 10K Resistors 35 x 100 Ohm Resistors 18 x 3mm Led mounts 18 x 3mm LED lights 3 x 3 pin 2 pos switches 1 x 5 pos switch 3 x 40 pin female + 3 x 40 pin male connectors 1 x 2.1 mm DC Power Jack flyingforfun.freeforums.net/thread/61/amounts |
|
|
|
Post by AlbEagle on Jan 13, 2019 21:04:50 GMT 2
Hi what a resistor is at R29, he is missing on the resistor sheet Hi there buckbuck, sorrry didn't notice that. R29 220 Ohm. |
|
|
|
Post by AlbEagle on Jan 13, 2019 21:06:38 GMT 2
Do you happen to have similar ebay links for the components? Since coming across your site I have been so excited to embark on this little project. I have received some of the parts and have begun soldering. But, I now realize I have the wrong resistors and want to assure I purchase the correct ones. I am not an electrical engineer, but soldering has been something I have tinkered in since being a child. here it is: link at the bottom. list made by alb eagle. the resistors capacitors arnt listed on the board alb eagle said he will soon make a key for the resistor placement. Have fun! 18 x Rotary encoders 3 x encoders with on/off switch 35 x Tactile Push Buttons 3 x 3 digit 7 segment display 0.36inch CC RED 6 x 4 digit 7 segment display 0.36inch CC RED 1 x 6 digit 7 segment display 0.36inch CC RED 9 x 5 digit 7 segment display 0.36inch CC RED 2 x 2 digit 14 segment display CC RED 18 x Max7219 Chips 18 x Max7219 Sockets 18 x 50V 0.1uF Capacitors 18 x 25V 10uF Capacitors 18 x 220 Ohm Resistors 18 x 10K Resistors 35 x 100 Ohm Resistors 18 x 3mm Led mounts 18 x 3mm LED lights 3 x 3 pin 2 pos switches 1 x 5 pos switch 3 x 40 pin female + 3 x 40 pin male connectors 1 x 2.1 mm DC Power Jack flyingforfun.freeforums.net/thread/61/amountsHi there mrphoenix1975 Which resistors do you mean. I can check on ebay and post the links. |
|
|
|
Post by mrphoenix1975 on Jan 13, 2019 22:47:57 GMT 2
Well, if you wouldn't mind the capacitors and the resistors. In my searches I see some have different voltage and so forth so I wasn't quite sure. Obtaining the right parts is the biggest concern so far.
Right now I have soldered some of the 4 digits displays in that have arrived.
|
|
|
|
Post by mrphoenix1975 on Jan 14, 2019 3:34:01 GMT 2
I have done an itemized check finally on what i have. So it seems I need to only find 3 more items.
The:
200 Ohm Resistors
100 Ohm Resistors
LED Lights
Question, for the LED, I would assume match those specs with and orange and blue or something close for the omi lights?
|
|
|
|
Post by mrphoenix1975 on Jan 26, 2019 0:24:34 GMT 2
I have done an itemized check finally on what i have. So it seems I need to only find 3 more items. The: 200 Ohm Resistors 100 Ohm Resistors LED Lights Question, for the LED, I would assume match those specs with and orange and blue or something close for the omi lights? Would you happen to be able to tell me which 100 and 200 ohm resistors I should use? |
|
|
|
Post by buckbuck on Jan 27, 2019 13:09:18 GMT 2
Hi was für ein Widerstand bei R29 ist, er fehlt auf dem Widerstandsblatt Thanks for the prompt reply |
|
|
|
Post by AlbEagle on Feb 17, 2019 10:37:36 GMT 2
Yes that's correct.
Any 100 and 200 Ohm resistor would be ok.
|
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Nov 9, 2020 0:11:02 GMT 2
HI, Just wonder if there is a component list for the power supply section.  If I only use 5 V supply, do I need to install these components? Many thanks. KK |
|
|
|
Post by AlbEagle on Nov 9, 2020 8:43:42 GMT 2
HI, Just wonder if there is a component list for the power supply section. View AttachmentIf I only use 5 V supply, do I need to install these components? Many thanks. KK No you don't need to, this was removed from the previous version. |
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Nov 11, 2020 15:06:03 GMT 2
HI, I have been sourcing the components for the radio stack and have found two different versions of the 6 digit 7-segment display.   Which is the correct one for the PCB board? KK |
|
|
|
Post by polarair on Nov 11, 2020 18:47:19 GMT 2
they should be common cathode. I bought all of mine via Aliexpress. As for the components, buy plastic stem encoders else you can drill them. You will need to open them to take out the switch as this is a mess inside.
Also buy higher switches for the DME, ADF switches as the real mini ones are to small after yoy put the face plate.
good luck
|
|
bosal
New Member
Posts: 42
|
Post by bosal on Nov 11, 2020 21:15:13 GMT 2
HI, I have been sourcing the components for the radio stack and have found two different versions of the 6 digit 7-segment display. View AttachmentView AttachmentWhich is the correct one for the PCB board? KK Last one, DP-segment is connected to pin7 of the display. |
|
