|
|
Post by nighteagle on Feb 26, 2021 21:15:23 GMT 2
@klee
have used your files for Encoders/LED/Switch - sometimes if i upload the configs to the arduinos something is weird . Because if i do a test some segments missing - if i upload the config in another order then the test is fine - but i miss one number on one segment during test - and later during test the missing number is showing alone on the segment - looks like wrong config for the test?.
Then i have problems with the switches/encoders only a few are working - on the config i see some not right set switches.
Little bit confusing me, if it a problem of the files means the logic or a problem of the right order - but it doesn't matter!?
I load the files to the right arduinos i think:
Card 1 (SN-Number 1a4) for encoders
Card 2 (SN-Number 1b9) for LED
Card 3 (SN-Number 658) for Switches
Some ideas?
|
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Feb 27, 2021 1:31:58 GMT 2
ENCODERS RADIO.mfmc (1.82 KB) SWITCH RADIO.mfmc (1.7 KB) LEDS RADIO.mfmc (1.43 KB) Here are the latest version of mcc and mfmc files. They work with Mobiflight version 8.0.1 (I have not tried it for version 8.0.2 yet) All the encoders/switches work with C172 but some do not if you , say fly C152. I made some modification such as reversing the pins in the encoders; reassign the COM1 and COM2 ON/OFF switch for switching between 25k and 8.33k You may give it a try but, even in the old version of files I uploaded, all the LEDs and 7-segments light up correctly. So you may need to check your circuit or swap some MAX chips. Hope it helps.
|
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Feb 27, 2021 1:32:19 GMT 2
|
|
|
|
Post by nighteagle on Feb 27, 2021 11:25:31 GMT 2
Hello kklee, have test it but is not working correct - here see mobiflight: and here the picture of my pcb: SWAP-Buttons not working Sometimes the Transponder is on sometimes not and sometimes go off if i make some other rotastions on other encoders.
I see unter Xpander State = 0 and there is set the FSUIPC 0x0B46 but always 0? On the Xplane transpinder is on - so it means the wrong FSUIPC from the sim?
|
|
|
|
Post by nighteagle on Feb 27, 2021 11:30:50 GMT 2
Something wrong with the image-link? 
Have add link to my space...
|
|
|
|
Post by nighteagle on Feb 27, 2021 12:14:46 GMT 2
So okay...
i use xplane11 and not MSF2020 - so the events are not working...
|
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Feb 27, 2021 13:22:26 GMT 2
So okay... i use xplane11 and not MSF2020 - so the events are not working... In this case, the mcc file is for MSFS2020 or FSX so it won't work for you. Not just the events, the offsets may not work neither. |
|
|
|
Post by nighteagle on Feb 27, 2021 14:19:56 GMT 2
I use XSUIPC - are the offsets different? I thought the offsets from FSUIPC are mapped with XSUIPC to communicate with xplane11.
|
|
|
|
Post by nighteagle on Feb 27, 2021 15:24:47 GMT 2
Hello kklee,
i have checked something - so it loosk like is some mistakes with your V9? Have alook on the offsets - specially from com1 on and com 1 off - there are differnt and the offsets 05c4 or others are not in the offset list.
If i set it to the same offset it works correct - also some setting are not active like "Vergleichen" so then the digits missing first character.
Have a look on your V9.mcc
|
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Feb 27, 2021 16:28:38 GMT 2
Yeah I forgot to mention. In v9, I use the new offsets
05C4 4 Active COM1 frequency
05C8 4 Active COM2 frequency
05CC 4 Standby COM1 frequency
05D0 4 Standby COM2 frequency
They hold the full six digits of the frequencies.
As for those "OFF" displays, they are null displays and the offsets are irrelevant.
|
|
|
|
Post by nighteagle on Feb 27, 2021 20:01:40 GMT 2
Where are the new offsets? Is there a list?
|
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Feb 28, 2021 1:53:26 GMT 2
|
|
|
|
Post by nighteagle on Mar 1, 2021 11:46:21 GMT 2
Hello kklee,
have installed MSF2020 and the newest FSUIPC 7 installed and have test it out. Looks like it works - but the buttons on the ADF and Transponder not working - but the config shows MSF2020 Events but this looks like not to work? If i change the config to use the same button for some other like com-swap then it works - so it is not a hardware-problem on my radiostack-pcb...
Some ideas are welcome...
|
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Mar 1, 2021 13:26:32 GMT 2
Did you load the aircraft C172 in the sim?
ADF buttons and Transponders buttons are programmed to work with C172 equipped with KR87 and KT76C only.
I tried it with C152 in MSFS2020. They did not work neither.
|
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Mar 1, 2021 13:31:55 GMT 2
I meant the C172 classic in MSFS 2020 premium or deluxe version.
If you only have the standard version which only comes with C172 G1000. Those buttons may not work. I did not try them with C172 G1000.
|
|
