|
|
Post by idekkers on May 1, 2024 11:32:24 GMT 2
anyone got a working 3.2 already?
|
|
|
|
Post by ohballsnotagain on May 1, 2024 12:19:08 GMT 2
Hiya, so far having a few issues with encoders and the led lighting is a little erratic, when I'm able too I will take another look when I'm on shore.
|
|
|
|
Post by idekkers on May 2, 2024 9:17:27 GMT 2
I have a strange issue with 3.1 -
when turning power on to the board, some of the 7seg turn on full brightness, and when the sim connects, they stay fully lit and ignore any input.
the bigger problem is this is random - every time I turn on power, it happens to different 7segs, but always to COM2, NAV1 and NAV2.
all the rest of the board accept for the NAV2 MHz encoder works
any ideas?
|
|
|
|
Post by AlbEagle on May 2, 2024 10:13:27 GMT 2
I have a strange issue with 3.1 - when turning power on to the board, some of the 7seg turn on full brightness, and when the sim connects, they stay fully lit and ignore any input. the bigger problem is this is random - every time I turn on power, it happens to different 7segs, but always to COM2, NAV1 and NAV2. all the rest of the board accept for the NAV2 MHz encoder works any ideas? I contacted jlcpcb about my V3.2 and GPS. They told me they are lost  Regarding the 3.1 7 segments, let me check the schematics once I get home. |
|
|
|
Post by ohballsnotagain on May 2, 2024 10:56:20 GMT 2
I check every componant before attaching it to the board, I have had a few duff encoders from Aliexpress, although the 7 seg displays were checked by the guy I purchase then from, possibly a mobiflight error maybe ?
|
|
|
|
Post by AlbEagle on May 2, 2024 12:04:30 GMT 2
Hiya, so far having a few issues with encoders and the led lighting is a little erratic, when I'm able too I will take another look when I'm on shore. What is the issue with the encoders and which ones? |
|
|
|
Post by ohballsnotagain on May 2, 2024 12:21:49 GMT 2
Sometimes they work fine, and other times they seem to skip or miss digits ie if you scroll down 1 click the display jumps down 5 numbers.
I will check my side of things with mobiflight see if I have entered something incorrectly.
Thanks for getting back to me Albeagle, I hope your well.
|
|
|
|
Post by AlbEagle on May 14, 2024 9:39:53 GMT 2
I have a strange issue with 3.1 - when turning power on to the board, some of the 7seg turn on full brightness, and when the sim connects, they stay fully lit and ignore any input. the bigger problem is this is random - every time I turn on power, it happens to different 7segs, but always to COM2, NAV1 and NAV2. all the rest of the board accept for the NAV2 MHz encoder works any ideas? I checked the connections, and they seem to be OK. COM1/NAV1, COM2/NAV2 are connected in series and use the same pins, so if there was any issue, it should affect them all. Can you please check the mobiflight configuration one more time (even preconditions or any other config) which might be there by mistake. DIN1 D40 LOAD1 D42 CLK1 D51 |
|
|
|
Post by AlbEagle on May 14, 2024 9:51:36 GMT 2
I have a strange issue with 3.1 - when turning power on to the board, some of the 7seg turn on full brightness, and when the sim connects, they stay fully lit and ignore any input. the bigger problem is this is random - every time I turn on power, it happens to different 7segs, but always to COM2, NAV1 and NAV2. all the rest of the board accept for the NAV2 MHz encoder works any ideas? For the NAV2 Mhz encoder, are you using the following pins: N2MHZ+ D23 N2MHZ- D28 |
|
|
|
Post by AlbEagle on May 15, 2024 15:28:39 GMT 2
I have a strange issue with 3.1 - when turning power on to the board, some of the 7seg turn on full brightness, and when the sim connects, they stay fully lit and ignore any input. the bigger problem is this is random - every time I turn on power, it happens to different 7segs, but always to COM2, NAV1 and NAV2. all the rest of the board accept for the NAV2 MHz encoder works any ideas? Is it NAV1 or NAV2 that's not working. Just wanted to make sure because NAV1 is connected to pin13 which sometimes causes problems. I had to change that pin on another radio. If it is NAV1 please let me know.  |
|
|
|
Post by idekkers on May 20, 2024 19:58:36 GMT 2
will check again once I fire up the computer again, and post a small video with the 7seg problem
|
|
|
|
Post by idekkers on Nov 26, 2024 10:46:05 GMT 2
Hey Alb
did you get the PCB's for the radio stack and the one with the garmin to check?
don't want to order them without you checking them first
|
|
