|
|
Post by AlbEagle on Aug 25, 2024 11:50:52 GMT 2
I thought you were interested in start selling so interested buyers could order pcb´s and all the components that belong to this projekt. But perhaps I misunderstood you. ?? Hi JJ, I apologize for the delay, you understood correctly, but I was too busy working, I couldn't even turn on my PC lol. I have just published the files, please check the downloads section on the website (still without the 3d printing .stl files which I already have the majority but need to modify as they were designed for version 2.2) please let me know if there are any questions. Best regards AlbEagle |
|
|
|
Post by AlbEagle on Aug 25, 2024 11:55:03 GMT 2
By the time you send the gerber file away to a pcb manufacturer to have it made, and normally a minimum quantity of 5, this could take 2 maybe 3 weeks, then there is the time it would take for you to source the electronic components which is supplied in a BOM spreadsheet. when the PCB file, BOM and I am guessing the stl's when alb has finalised fit and finish, let's be honest you wouldn't want to spend hours printing the STL files only to find they were wrong, give the guy a break he works hard at what he does ! Hi Ian, Thanks for the respond, as I was explaining to JJ, I couldn't work on the project as I was too busy somewhere else. Now I have published the files, still working on the .STL files. Will try to finish ASAP. If someone wants to go with laser cutting or engraving, there is a .dxf file included. For all those that have purchased all files, please redownload the same link, you will have this included  Best regards AlbEagle |
|
|
|
Post by ohballsnotagain on Aug 25, 2024 11:59:24 GMT 2
I'm not into airbus or The big planes, I don't have the intelligence to remember what needs doing, so will stick to building the cessna.
Regards
Ian
|
|
|
|
Post by AlbEagle on Aug 25, 2024 12:01:04 GMT 2
I'm not into airbus or The big planes, I don't have the intelligence to remember what needs doing, so will stick to building the cessna. Regards Ian Hi Ian, How is the project going, any struggles? Regards AlbEagle |
|
|
|
Post by JJ on Aug 25, 2024 16:53:13 GMT 2
Hi AlbEagle, I am sorry for pushing you when you are so busy. But the good news is, I have bought the files, and they are now on my computer. Thanks for your great work
|
|
|
|
Post by AlbEagle on Aug 25, 2024 22:20:05 GMT 2
Hi AlbEagle, I am sorry for pushing you when you are so busy. But the good news is, I have bought the files, and they are now on my computer. Thanks for your great work Hi JJ thank you for supporting my work Best regards AlbEagle |
|
|
|
Post by Andres ayala on Aug 28, 2024 15:35:58 GMT 2
Good morning friends, I have bought the FCU and EFIS 1.7 package and I already have the cards at home from JLC PCB. I have already assembled them but I have a problem and that is that I have not been able to get the 7-segment displays to work. I do not see the mapping in the instructions and I do not know how it is configured.
Can anyone help me? Thank you very much!!
|
|
|
|
Post by JJ on Aug 30, 2024 15:44:26 GMT 2
Hi AlbEagle, Is it possible to get the Cpl file, so it is possible to order the PCB with one side assembled with components. My mail is joe-pam @hotmail.com
|
|
|
|
Post by Jose M on Aug 30, 2024 20:52:42 GMT 2
Hi Alb Eagle,
I,m interested in making the FCU 1.7 and Efis 1.7.1.Besides the Gerber, CAD, STL, and FBW Config do you include the bom and the pinouts.
Thanks very much
|
|
dezz
New Member
Posts: 2
|
Post by dezz on Aug 31, 2024 11:28:47 GMT 2
Hi Alb Eagle,
First bravo for your work
I bought the Airbus A320 FCU + EFIS V2.5 with KAV displays PCB
But after the payment nothing hapenned, I wasn't redirect to the download link
I sent you a mail to explain the problem already but no answer
Probably you 're busy.
Thanks to help me
Désiré
|
|
|
|
Post by ohballsnotagain on Aug 31, 2024 12:31:48 GMT 2
Hi AlbEagle, I am sorry for pushing you when you are so busy. But the good news is, I have bought the files, and they are now on my computer. Thanks for your great work |
|
|
|
Post by ohballsnotagain on Aug 31, 2024 12:32:55 GMT 2
Hey Alb,
Not going to bad thanks my friend, slow progress due to working away but it's moving forward, how are you of late, working hard no doubt
Regards
Ian
|
|
|
|
Post by ohballsnotagain on Aug 31, 2024 12:33:50 GMT 2
Hi AlbEagle, I am sorry for pushing you when you are so busy. But the good news is, I have bought the files, and they are now on my computer. Thanks for your great work |
|
|
|
Post by ohballsnotagain on Aug 31, 2024 12:35:58 GMT 2
Hey Dèsirè
Alb will definately send the files, I think there is an issue with the forwarding thingy, I had the same, but recieved them fine and dandy, I hope this puts your mind at rest.
|
|
|
|
Post by ohballsnotagain on Aug 31, 2024 12:37:06 GMT 2
Good morning friends, I have bought the FCU and EFIS 1.7 package and I already have the cards at home from JLC PCB. I have already assembled them but I have a problem and that is that I have not been able to get the 7-segment displays to work. I do not see the mapping in the instructions and I do not know how it is configured. Can anyone help me? Thank you very much!! |
|
