|
|
Post by craighaskell on May 21, 2018 16:56:48 GMT 2
Brilliant! Thanks AlbEagle, I will message you on Friday with confirmation.
|
|
|
|
Post by Rycco on Jan 15, 2019 19:00:54 GMT 2
Hello AlbEagle, I was wondering if you are able to open your PCB design for slight changes? (as gerber is a final form and can't be modified easily) I was thinking about using the radio stack with SimVim interface, which requires a slightly different approach to arduino connection.
Thanks
|
|
|
|
Post by jetraid on Apr 24, 2019 15:26:50 GMT 2
Any chance of getting the design files (proteus?) to fix de split encoder error and redesign the board?
|
|
|
|
Post by desduf63 on Sept 2, 2019 17:36:02 GMT 2
Hi just new to the forum but following for a while now, please can you help re the Arduino board Gerber file. I have downloaded both the Radio Stack and the Arduino zip file. Uploaded the radio file to jlcpcb.com/ no problems. But when I went to upload the Arduino File they did not give any image in the Gerber viewer and in the Analysis result stated it could not find the PCB or Gerber files. The file I downloaded was the arduinomodded.zip file. Have I down loaded the wrong one? Is there another one which I missed?
|
|
|
|
Post by Mario on Sept 9, 2019 15:04:06 GMT 2
After Upload the Arduinomodd-File and order the pcb, I got this answer:
Order Review:2019-09-09 13:39:59
Check the audit failed reason:
Hi Sir/ Madam, Sorry to bother you, but so sorry that we cannot imported your file into the software, could you please kindly check and change it into gerber format of RS-274-X so that we can check?
With 2 other Gerber-Files no problem (GPS and Radiostack). Where is the problem here ?
|
|
mario
New Member
Posts: 6
|
Post by mario on Sept 18, 2019 13:51:41 GMT 2
This forum still is alieve ? Nobody answers simple questions, same I see by other forum members. I´m correct that currently no usable Arduino shield PCB is available, so the radio stack isn´t buildable too ?
|
|
|
|
Post by username on Sept 22, 2019 18:04:29 GMT 2
This forum still is alieve ? Nobody answers simple questions, same I see by other forum members. I´m correct that currently no usable Arduino shield PCB is available, so the radio stack isn´t buildable too ? Ya, that's pretty much it. The board design works, but Alb hasn't been very helpful solving everyone problems getting hold of one. |
|
|
|
Post by stemroach on Sept 23, 2019 13:08:20 GMT 2
After Upload the Arduinomodd-File and order the pcb, I got this answer: Order Review:2019-09-09 13:39:59 Check the audit failed reason: Hi Sir/ Madam, Sorry to bother you, but so sorry that we cannot imported your file into the software, could you please kindly check and change it into gerber format of RS-274-X so that we can check? With 2 other Gerber-Files no problem (GPS and Radiostack). Where is the problem here ? Hi Mario, I had this issue as well. The problem is that the Arduino Shield files on the site are still in "Proteus" format (the program that was used to design them). They need to be in "Gerber File" format for the PCB Manufacturer to process them. There is however a fairly simple (and Free) solution. If you download the Free Demo version of Proteus from www.labcenter.com/downloads/ , you will be able to use it to open the Proteus file from AlbEagle's site and then export it as a "Gerber File" set. These will be accepted by the PCB manufacturer. I will add however that when I did the export I got a couple of error messages. I ignored these and sent the file for manufacture anyway and what I got back appears to be OK. I will update when I get it soldered. Best of luck with your project Dave B |
|
mario
New Member
Posts: 6
|
Post by mario on Sept 23, 2019 20:55:49 GMT 2
Hi Dave,
Thank you very much for your very helpful reply. I will try to go this way.
Best regards and good luck
Mario
|
|
|
|
Post by stemroach on Sept 25, 2019 11:47:59 GMT 2
Hi Mario,
When I ordered my boards I had to order 5 of each.
If you are in the UK I could let you have a set of three boards (Radio Stack/Arduino Shield/GPS) for £25.
If you (or anyone else) is interested post back here and I'll put them on E-bay
Regards
Dave B
|
|
mario
New Member
Posts: 6
|
Post by mario on Sept 25, 2019 15:23:39 GMT 2
Hi Dave,
Thank you for your offer :-) Yes, I´m interested to buy one set and your price of 25 GBP is fine :-)
Best regards
Mario
|
|
|
|
Post by stemroach on Sept 25, 2019 20:23:34 GMT 2
|
|
|
|
Post by desduf63 on Oct 11, 2019 1:26:39 GMT 2
Hi everyone, finally received my boards for the Radio and shield and have ordered the GPS boards which are on it's way. I will have 3 sets spare if anyone is interested let me know also for £25 a set. I Decided to keep a spare set just in case I mess up. Still awaiting led display s from China taking ages:(.
My e-mail is desduf63@gmail.com
Des
|
|
|
|
Post by vladimir0104 on Oct 11, 2019 10:12:43 GMT 2
I have the radiostack and the arduino pcb, 35 euro including shipping for both. No win on my side. If interested write me a message with your address. My paypal email is fatmirh@hotmail.com. I think I still have three spares left. Do you still have those PCB's ?
I sow that you have gerber files for MAIN radio stack, not for Arduino shield ? I'm interest in buying whole set of those PCB's . Thank you !
|
|
|
|
Post by aveviajera on Dec 15, 2019 5:10:14 GMT 2
Hi everyone, maybe it's a good idea that if someone orders the radiostack pcb's (and does for instance an order of 5 which is usually the minimum quantity) he/she announces this on this board in this section so that other's can contact the buyer for the excess pcb's (like I have done for the GPS pcb's). Anyone orderering? I am willing to take one excess PCB since I have not ordered my PCB's yet. Bartr I have |
|
