Post by viniciusquadros on Jul 26, 2019 2:52:04 GMT 2
Hello Folks!
I'm having a issue. I hope you all can help me.
I bought a two-seesaw key to simulate the master alternator and the master battery of Cessna 172.
I connected the first seesaw key to arduino and upload the config to mobiflight using a button as an input.
I set, on press, the offset "0x3101", Int, Size 1, Mask Value with 0xFF, Value 1.
I set, on release, the offset "0x3101", Int, Size 1, Mask Value with 0xFF, Value 0.
The key worked great. When I lift the key, the alternator lift on the simulator.
The same occurs when a down the key, the alternator down on the simulator.
The problem is... If I change alternator on the simulator with a mouse click... and then... lift or down the seesaw key... the moviment on the simulator be opposite of the seesaw key. Example: I lift the seesaw key, and the alternator on the simulator turns down. I down the seesaw key, and the alternator on the simulator turns on.
How can I solve this?
I know that I can adjust this mannualy (with mouse clicks). But I don't want to adjust this everytime I'm planning to fly. I'm saying this because it's possible to load the airplane with some switches lift or down, differently of the switch positions of the home cockpit.
Here are some pics on how my hardware and software (MobiFlight) are configurated:
Here is a video of my issue using the settings show on the pics above:
This is the key I'm Using:
Note1: I tried to use this same key with the function of strobe lights.
Worked perfectly! Even when I change the strobe switch with mouse click I change the key position two times and the simulator sync correctly with my hardware.
The issue appears to be only on the master alternator...
Note2: I'm using Cessna172 A2A.
I apreciate your help.
Sorry for any mistakes in English. I speak portuguese (from Brazil).
I'm having a issue. I hope you all can help me.
I bought a two-seesaw key to simulate the master alternator and the master battery of Cessna 172.
I connected the first seesaw key to arduino and upload the config to mobiflight using a button as an input.
I set, on press, the offset "0x3101", Int, Size 1, Mask Value with 0xFF, Value 1.
I set, on release, the offset "0x3101", Int, Size 1, Mask Value with 0xFF, Value 0.
The key worked great. When I lift the key, the alternator lift on the simulator.
The same occurs when a down the key, the alternator down on the simulator.
The problem is... If I change alternator on the simulator with a mouse click... and then... lift or down the seesaw key... the moviment on the simulator be opposite of the seesaw key. Example: I lift the seesaw key, and the alternator on the simulator turns down. I down the seesaw key, and the alternator on the simulator turns on.
How can I solve this?
I know that I can adjust this mannualy (with mouse clicks). But I don't want to adjust this everytime I'm planning to fly. I'm saying this because it's possible to load the airplane with some switches lift or down, differently of the switch positions of the home cockpit.
Here are some pics on how my hardware and software (MobiFlight) are configurated:
Here is a video of my issue using the settings show on the pics above:
This is the key I'm Using:
Note1: I tried to use this same key with the function of strobe lights.
Worked perfectly! Even when I change the strobe switch with mouse click I change the key position two times and the simulator sync correctly with my hardware.
The issue appears to be only on the master alternator...
Note2: I'm using Cessna172 A2A.
I apreciate your help.
Sorry for any mistakes in English. I speak portuguese (from Brazil).
)