|
|
Post by daneboulton on Oct 28, 2017 8:19:50 GMT 2
Hi looking at the radio wiring diagram I am wondering what the connection order is of the DME.
Pins GND, 28, 30 and 32 come to the DME from the autopilot. Do they connect to the Displays that show the DME KTS and NM numbers first. Or are the two Max Chips driving the 14 Decimal displays that show the NM and KT connected first.
Cheers
|
|
|
|
Post by AlbEagle on Oct 29, 2017 22:28:30 GMT 2
Hi looking at the radio wiring diagram I am wondering what the connection order is of the DME. Pins GND, 28, 30 and 32 come to the DME from the autopilot. Do they connect to the Displays that show the DME KTS and NM numbers first. Or are the two Max Chips driving the 14 Decimal displays that show the NM and KT connected first. Cheers Values of DME and NM are connected in series with the two max chips (14 segment displays for displaying KT and NM characters) and the rest of the displays that are connected to the ports 28, 30 and 32. Which one you connect first doesn't matter as long as you specify in mobiflight the order of the display. For example below we say that the third module (max chip) will display DME values in character 4 . . . 8 and a decimal point. As I said you can change the order in mobiflight.  Albeagle |
|
|
|
Post by hannes1 on Feb 6, 2018 10:35:39 GMT 2
Hello, could you send me a connection plan from the radio panel. So which switch which pin. So I can use your Mobiflight configuration on the Arduino. Thank you
|
|
|
|
Post by AlbEagle on Feb 7, 2018 1:15:27 GMT 2
Hello, could you send me a connection plan from the radio panel. So which switch which pin. So I can use your Mobiflight configuration on the Arduino. Thank you Do you mean DME connections or which ones? AlbEagle |
|
|
|
Post by hannes1 on Feb 7, 2018 7:20:30 GMT 2
i mean the Pin numbers form the Displays, Buttons and Rotary Encoders from the Radio stack, on the Arduino board.
thanks
|
|
|
|
Post by AlbEagle on Feb 8, 2018 23:35:46 GMT 2
i mean the Pin numbers form the Displays, Buttons and Rotary Encoders from the Radio stack, on the Arduino board. thanks Sorry for not replying. I have a flew and couldn't do anything. As I'm working on the new radio I don't have the old connection order. Once I get the pcb I have to configure everything again, once I do that i will share the config file and the pin order. AlbEagle |
|
