|
|
Post by craighaskell on May 22, 2018 14:26:16 GMT 2
Hi AlbEagle,
Could you tell me what rotary encoders you used for the instrument panel? AHI etc.
TIA as always
|
|
|
|
Post by AlbEagle on May 22, 2018 23:21:10 GMT 2
Hi AlbEagle, Could you tell me what rotary encoders you used for the instrument panel? AHI etc. TIA as always Do you mean the hdg, vor1, vor2, adf etc. |
|
|
|
Post by craighaskell on May 23, 2018 0:06:39 GMT 2
Hi AlbEagle, Could you tell me what rotary encoders you used for the instrument panel? AHI etc. TIA as always Do you mean the hdg, vor1, vor2, adf etc. I did indeed  |
|
|
|
Post by AlbEagle on May 23, 2018 1:16:51 GMT 2
|
|
|
|
Post by craighaskell on May 23, 2018 1:19:05 GMT 2
Thank you again for your help. One last thing for a while is do you have a wiring diagram to a leo bodnar card? Thanks again for your help and not to mention time
|
|
|
|
Post by AlbEagle on May 23, 2018 3:37:21 GMT 2
Thank you again for your help. One last thing for a while is do you have a wiring diagram to a leo bodnar card? Thanks again for your help and not to mention time I have actually never had a leo bodnar card, but it is straight forward. The card is recognized as a Joystick so you can assign a direct command on Flight simulator. I will put some pictures which might help you with the connections:   |
|
|
|
Post by richardschreier on Feb 17, 2021 23:52:54 GMT 2
Hi AlbEagle,
In a previous post a question was asked about a wiring diagram for the rotary switches that drive each of the instruments and are eventually connected to an Arduino Nano (I think that's what I read on your website), is a wiring diagram available? I see the previously posted pics are no longer available.
Thanks
Richard
|
|
