|
|
Post by craighaskell on May 24, 2018 21:45:04 GMT 2
Hey, Sorry to be a pain again.
I'm just trying to price up some stuff before tomorrow and need some help if possible.
I need the following information.
How many of the below do I need:
3mm LED Hodlers
5mm LED Holders
330ohm resistors
10k resistors
3 pin 2 pos switch
Also with the on/off pot, how does one of them get soldered onto the mobo?
Thank you as always
|
|
|
|
Post by craighaskell on May 24, 2018 22:27:12 GMT 2
Oh one other thing,
Where can i get the 7 seg display for the KT and NM?
TIA
|
|
|
|
Post by AlbEagle on May 24, 2018 23:29:07 GMT 2
Hey, Sorry to be a pain again. I'm just trying to price up some stuff before tomorrow and need some help if possible. I need the following information. How many of the below do I need: 3mm LED Hodlers 5mm LED Holders 330ohm resistors 10k resistors 3 pin 2 pos switch Also with the on/off pot, how does one of them get soldered onto the mobo? Thank you as always You need: 18 x 3mm LED holders (you can choose to use 5mm leds or 3mm leds, but you don't need both) 3x 2 pin 2 pos switches 330 ohm resisotors and 10k resistors are cheap $1 for 100 pcs, so I suggest you buy 100 pcs each. you would need not more then 40 for each. I don't have my PC currently available and I can't tell you exactly how many resistors you need but since they are so cheap i recommend buying 100 of each. For NM and KT you need 2 digit 14 segment displays. You can find them on ebay or aliexpress, just search for 2 digit 14 segment displays. You have to be careful, before ordering them you need to contact the seller and ask them if they have Common Cathode because Common Anode won't work. |
|
|
|
Post by craighaskell on May 26, 2018 21:41:49 GMT 2
Thank you for your help! once again youve come to my rescue  |
|
|
|
Post by craighaskell on Jun 7, 2018 23:44:41 GMT 2
Hi Alb,Thank you, I have received the radio panel in perfect condition, I'm one happy man!You mentioned above that I needed the Common Cathode display and not the Common Anode.However, I have purchased the Common Cathode ones and they are 13 pins and not the 14 Pins like the ones on the Common Anode ones.Could you confirm if that's right?TIA CraigForget that I completely screwed up and bought the 0.56 and not the 0.36 display  |
|
|
|
Post by AlbEagle on Jun 8, 2018 20:46:56 GMT 2
Sorry to hear that.
|
|
