|
|
Post by above1 on Mar 21, 2021 21:25:19 GMT 2
Here is the frequent face plate "Bottom Half" with the 5 selector hole in a better location. I'm in the process of printing the final, but my tests did prove it's location is correct. I haven't move the text yet as I haven't gotten to that point. As soon as I do I'll post that STL. Larry Attachments:FreqPlate v2.stl (214.33 KB)
|
|
|
|
Post by polarair on Mar 21, 2021 23:17:00 GMT 2
NIce
|
|
|
|
Post by above1 on Mar 22, 2021 4:38:56 GMT 2
I can say that the location for the hole is in the correct place now. The top section is primed and sanded ready for flat black.  Attachments:
|
|
|
|
Post by dmanbob on Mar 22, 2021 19:47:51 GMT 2
Good Stuff!
|
|
|
|
Post by polarair on Mar 26, 2021 17:18:08 GMT 2
Looks very nice@@!!
|
|
mylan
New Member
Posts: 5
|
Post by mylan on Mar 27, 2021 9:58:05 GMT 2
I will but a 3D printer
But before I need to Knowles the site of the face plateau of the radiostack to but the Goodyear 3d printer
|
|
|
|
Post by markha1 on Oct 7, 2022 2:14:29 GMT 2
Can anyone help me get a file that I can laser engrave the buttons with? I have tried with no success to convert the .STL files and am becoming a bit frustrated.
Mark H
|
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Oct 7, 2022 12:01:44 GMT 2
Can anyone help me get a file that I can laser engrave the buttons with? I have tried with no success to convert the .STL files and am becoming a bit frustrated. Mark H Here are the SVG files for laser engraving. buttons.svg (107.34 KB) FreqPlate v12.svg (495.3 KB) ComPlate v3.svg (705.48 KB) |
|
|
|
Post by markha1 on Dec 18, 2022 16:37:40 GMT 2
Thanks for the faceplates, how do I do the buttons, all I get is a smear when I try to 3D print them.
|
|
|
|
Post by markha1 on Mar 11, 2023 12:00:36 GMT 2
Good morning from Georgia USA. I have a short request. Can someone provide the faceplate dimensions, or point me to a place I can get the mechanical drawing? The file I am using seems to be a bit to short and to narrow. I am laser cutting it on poster board first to be satisfied it fits properly with the circuit board assembly and it is coming out narrow and short. The E steps have been calibrated so I am in a quandary. If I can get at least the outside dimensions at least then I can check the file I have. Update: I have wasted 4 sheets of acrylic trying to get a faceplate that aligns all encoders and switches, still coming our wrong. Does anyone have a file that aligns with their V2 latest version cca? Any help is welcome, frustrated. 5/18/23 Panel and most buttons now complete, thank you to all those who assisted me in getting this far.  |
|
