|
|
Post by buddymooneyhan on Mar 29, 2019 0:56:40 GMT 2
Regarding the face plate and the 5-pos switch, it doesn't seem to be that the spacing seems to be off. I have the switch pressed into the PCB as far as I can possibly get it and soldered in. It would seem that the switch is too tall for the displays to be close to the panel, and that the buttons will be short and not even make it to the panel. The only I can see that it would work is to cut a hole in the panel large enough for the entire switch to poke thru. Even if the displays were mounted in sockets they would still too far back away from the panel. Do you have any suggestions?
Thanks,
Buddy
|
|
|
|
Post by desduf63 on Oct 13, 2019 14:43:19 GMT 2
Hi have sent files for printing but advised by the printer company.
hello, some of the text is too small in the white files, COMM and STBY are fine but the smaller ones need to be at least 0.5mm thick around all letters, if you can send an updated file,
Can anyone help
|
|
|
|
Post by davbow on Sept 15, 2020 5:16:17 GMT 2
|
|
|
|
Post by polarair on Sept 26, 2020 9:30:11 GMT 2
can you repost the image, its not showing any more.
|
|
|
|
Post by davbow on Sept 30, 2020 17:32:18 GMT 2
can you repost the image, its not showing any more. Yes. I will do it when I get back on my main computer. |
|
|
|
Post by polarair on Oct 23, 2020 10:09:17 GMT 2
can you repost the image, its not showing any more. Yes. I will do it when I get back on my main computer. Small reminder for the new files and the pictures. |
|
|
|
Post by polarair on Oct 23, 2020 10:10:34 GMT 2
The only I can see that it would work is to cut a hole in the panel large enough for the entire switch to poke thru. Even if the displays were mounted in sockets they would still too far back away from the panel. Do you have any suggestions? Making a bigger button should cover the hole. Anybody willing to share the cad file for modification. |
|
|
|
Post by polarair on Oct 29, 2020 20:22:10 GMT 2
I reworked the faceplate, will be printiong it soon and if its correct upload it to the board.
Albeagle:
question do you have a connection list of all the arduino ports, not the pictures but a list or excel file, im programming the radio stack for Airmanager and its a mess looking at the pins and the descriptions. As they are not always really clear. So if you have something that would be helpful.
|
|
|
|
Post by AlbEagle on Oct 29, 2020 23:07:35 GMT 2
I reworked the faceplate, will be printiong it soon and if its correct upload it to the board. Albeagle: question do you have a connection list of all the arduino ports, not the pictures but a list or excel file, im programming the radio stack for Airmanager and its a mess looking at the pins and the descriptions. As they are not always really clear. So if you have something that would be helpful. I don't have them written as text but i could do that. |
|
|
|
Post by polarair on Nov 1, 2020 10:22:00 GMT 2
That would be really nice
|
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Nov 6, 2020 17:17:10 GMT 2
Hi,
I am new here and I am going to start working on this wonderful radio stack project.
Just one minor observation about the comtext STL file.
Should it be "COM STBY NAV STBY" instead of "COM STBY COM STBY"?
Thanks.
KK
|
|
|
|
Post by AlbEagle on Nov 6, 2020 19:27:26 GMT 2
Hi, I am new here and I am going to start working on this wonderful radio stack project. Just one minor observation about the comtext STL file. Should it be "COM STBY NAV STBY" instead of "COM STBY COM STBY"? Thanks. KK Yes that is correct, i don't know how i missed it  |
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Nov 6, 2020 23:30:41 GMT 2
Thanks for your confirmation.
KK
|
|
|
|
Post by AlbEagle on Nov 8, 2020 1:03:52 GMT 2
Hi, I am new here and I am going to start working on this wonderful radio stack project. Just one minor observation about the comtext STL file. Should it be "COM STBY NAV STBY" instead of "COM STBY COM STBY"? Thanks. KK Edited the faceplate text to COMM1 NAV1 and COMM2 NAV2 and uploaded on the website as well as on thingiverse   |
|
kklee6
Junior Member
Posts: 87
|
Post by kklee6 on Nov 8, 2020 6:09:14 GMT 2
Hi AlbEagle,
That's great.
You are absolutely very helpful.
KK
|
|
