Rudder pedals (components)
Guest
|
Post by Rudder pedals (components) on Aug 10, 2017 5:24:50 GMT 2
I trying to build this sim, but I have some problems, one of them are the rudders pedals, because I dont know what kind of Potentiometer or Encoder need, can you post the information? also I need to know where the pot/enc connect, in the arduino with lynk2fs or the arduino in the radio stack. Thanks a lot!!!!! If you have not problem, and give me your mail, I send the progress of my work, I live in Argentina.
|
|
|
|
Post by AlbEagle on Aug 24, 2017 0:18:28 GMT 2
I trying to build this sim, but I have some problems, one of them are the rudders pedals, because I dont know what kind of Potentiometer or Encoder need, can you post the information? also I need to know where the pot/enc connect, in the arduino with lynk2fs or the arduino in the radio stack. Thanks a lot!!!!! If you have not problem, and give me your mail, I send the progress of my work, I live in Argentina. Actually i'm not quite happy with the rudder pedals, if i build a new one i will surely make a thread about them. I have added a thread to post you work. I would be really happy to see your progress, could you please share it with us here on the forum under show your cockpit thread, or you can send me the pictures and I will post them for you in the forum. My e-mail address is: fatmirh@gmail.com AlbEagle |
|
|
|
Post by markha1 on Mar 21, 2023 17:29:52 GMT 2
The pedals I built use a Potentiometer for the rudder and steering and HAL effect sensors for the toe brakes. They feed a Arduino micro that talks directly to X-Plane as a "joystick. If you go this route you must add a 10 K pull up resistor to the output of the hall sensors.
|
|
